Waterproof your Home
A clear thick gel liquid
Water washable graffiti remover for unprotected substrates
Designed to remove both aerosol and marker pen grafitti from uncoated porous surfaces gelled for easy use on vertical areas.
PRODUCTS CONTAIN NO METHYLENE CHLORIDE OR METHANOL.
INSTRUCTION FOR USE
1 Hold cloth over top whilst opening.
2 Do not apply to sensitive material such as plastic,persex or previously painted surfaces. If in doubt carry out a small trail application.
3 Apply a thick coat by brush- for areas of heavy graffiti apply a second coat on top of the first coat after a few minutes.
4 Leave until graffiti reacts- usually between 10 and 20 minutes.
5 Rinse off with copious amounts of water - for best results use a power washer.
6 If a shadow remains then allow the surface to dry and repeat .
Approximately 10 square meters per litre on porosity of surfaces.
Clean all equipment with water immediately after use.